ICC Rankings Explained: How Teams and Players Are Ranked

The ICC rankings are cricket’s official ladders for teams and players in Test, ODI and T20I cricket. Teams are ranked by a rating, which is simply the points they have earned from matches over roughly the last three to four years divided by the number of matches they have played. Players are given a rating out of 1,000, calculated from every innings or spell they have bowled, with recent performances counting most and the quality of the opposition built into the maths.
That’s the short version. The longer one is more interesting, because the system rewards beating strong teams, quietly punishes losing to weak ones, and has a once-a-year reset that can move a side up or down the table without them bowling a ball. Here is how it all works, with real examples and the common misunderstandings cleared up.
Key facts about the ICC rankings
- There are separate ICC rankings for Tests, ODIs and T20Is, for men and women, for both teams and individual players.
- A team’s rating is its total ranking points divided by its total matches (with Test series also counted) over a rolling window of roughly three to four years.
- Recent results count in full, older results count at 50 per cent, and the oldest year drops out entirely at the annual update each May.
- Player ratings run on a scale of 0 to 1,000. Anything above 900 is exceptional; Don Bradman’s retrospective peak of 961 is the highest Test batting rating ever calculated.
- The rankings matter beyond bragging rights: the ODI table decides who qualifies directly for the 2027 Men’s Cricket World Cup.
A short history of cricket’s rankings
Player ratings came first. They were developed in 1987, reportedly at the suggestion of former England captain Ted Dexter, who felt career averages told you very little about who was actually the best player in the world right now. The system went through several sponsors’ names over the years (older fans will remember the Deloitte and PwC ratings) before the ICC took it under its own banner.
Team rankings followed. An ICC Test Championship table was adopted formally in 2003, and the method was applied retrospectively so that historians could see who would have been top in earlier decades. ODI team rankings arrived around the same time, and T20I rankings came later as the format grew. As of October 2026 the team rankings are sponsored by MRF Tyres, which is why you will often see them called the “MRF Tyres ICC Team Rankings” on the official site.
For years, being top of the Test table on a set cut-off date earned a team the ICC Test Championship mace and prize money. That role passed to the World Test Championship when it launched in 2019, which is why the Test rankings and the WTC table now often disagree. They measure different things over different periods, and both are perfectly valid.
How the ICC team rankings work
The core formula is almost disappointingly simple. Every match earns each team a number of ranking points. Add up all the points from the qualifying period, divide by the number of matches, and you have the team’s rating. The team with the highest rating is number one.
The clever part is how many points each match is worth. It depends on the result and on how strong the opponent was, measured by their rating going into the game. Beat a highly rated side and you collect a lot of points. Beat a minnow and you collect relatively few. Lose, and you still collect something, but much less.
The points formula when teams are close
When the two teams’ ratings are less than 40 points apart, the ICC uses this rule for each match:
- Win: the opponent’s rating plus 50
- Draw or tie: the opponent’s rating
- Loss: the opponent’s rating minus 50
Take an example with round numbers. A team rated 115 beats a team rated 105. The winners earn 105 + 50 = 155 points for that match. The losers earn 115 minus 50 = 65 points. Because the winners’ rating is an average, a 155 dragged into a pot that averages 115 pulls it upwards. The losers’ 65 drags their average down.
The points formula when teams are far apart
If the gap between the ratings is 40 points or more, a different rule kicks in. Points are now based on each team’s own rating, not the opponent’s, so a heavy favourite can’t farm big numbers from a weak side.
| Result | Stronger team earns | Weaker team earns |
|---|---|---|
| Stronger team wins | Own rating + 10 | Own rating minus 10 |
| Draw or tie | Own rating minus 40 | Own rating + 40 |
| Weaker team wins | Own rating minus 90 | Own rating + 90 |
Read that table carefully and the philosophy jumps out. When the favourite wins, very little changes, because that is what was supposed to happen. When the underdog wins, the swing is huge. That is exactly how it should be: a shock result tells you something new about both teams.
Series bonuses in Test cricket
Test cricket adds a twist. Because the five-day game is played in series, the winner of a series receives a bonus on top of the individual match points, and a drawn series sees the bonus shared. In the ranking calculation, a series effectively counts as an extra “match” too. The practical effect is that winning a series, not just a Test, carries real weight. Win a five-match Ashes series 3-2 and you are rewarded for the series as well as your three wins.
ODI and T20I differences
The white-ball rankings use the same idea of points per match based on result and opposition strength, but there are no series bonuses. Each ODI or T20I stands alone. Teams also need to have played a minimum number of matches in the period to appear on the table at all. For T20Is that is at least eight matches over the previous three to four years.
The T20I table is far bigger than the others. In April 2018 the ICC granted full T20I status to all of its members, so matches between associate nations count too. That’s why you will see around a hundred teams on the T20I list, from India and Australia down to sides who have only just begun to play international cricket.
The annual update: why teams move in May without playing
This is the part of the ICC rankings that confuses fans most, and it’s worth slowing down for. The rankings cover a rolling window of roughly three to four years. Within that window, the most recent results count at 100 per cent and the earlier ones count at 50 per cent.
Each May the ICC runs its annual update. The oldest year of results falls out of the calculation completely, and the middle chunk is moved from full weighting down to half weighting. Nothing is played that day, but the table can shift noticeably.
Here’s why. Imagine a team that had a brilliant run three years ago and a patchy one since. While the brilliant run sat in the calculation, it propped up their rating. The day it drops out, their rating falls. Another team who had a poor spell back then suddenly sees that weight lifted and climbs. So it’s entirely possible for a side to take or lose the number one spot in May without playing a match, and it has happened more than once at the top of the Test table, with India and Australia swapping places this way in recent years.
The weighting is a deliberate compromise. Count only the last year and the table would lurch around after every series. Count five years equally and it would barely reflect current form. Three to four years, tilted towards recent results, tries to sit in the middle.
How the ICC player rankings work
Player ratings are a different beast. They are not an average in the traditional cricket sense. They are a weighted moving average of every performance a player has produced, adjusted for context, and expressed on a scale from 0 to 1,000.
The key word is context. Fifty runs on a flat pitch against a weak attack in a high-scoring draw is not the same as fifty on a turning pitch against a top attack in a low-scoring win. The ratings try to tell those innings apart.
What counts for batters
- Runs scored, the obvious starting point.
- The strength of the bowling attack, measured by the ratings of the bowlers faced.
- The match context: runs in a low-scoring match are worth more than the same runs in a run-fest.
- The result: contributions to a winning side earn a bonus.
- Not-out innings, which are treated so that a batter is not unfairly punished for running out of partners.
What counts for bowlers
- Wickets taken, with more credit for dismissing highly rated batters. Bowling out the world’s number one batter is worth more than taking the last wicket of a tail.
- Runs conceded, set against how high-scoring the match was.
- The workload and the result, with wins again attracting a bonus.
How all-rounder ratings are calculated
The all-rounder rating is a neat bit of maths: multiply a player’s batting rating by their bowling rating, then divide by 1,000. A player rated 600 with the bat and 600 with the ball gets 360. A specialist batter rated 900 who barely bowls, say a bowling rating of 50, gets 45. The multiplication means you can’t top the all-rounder list by being brilliant at one thing. You have to be genuinely good at both. That is why Garry Sobers holds the highest all-rounder figure in historical Test ratings, at 669.
Why new players start slowly
New players carry a damping factor. In Tests it takes roughly 20 matches before a player’s rating is given its full weight. This stops someone from shooting to number one after a dazzling debut series. A young batter who scores two hundreds in his first three Tests will climb fast, but he will not leapfrog a player who has done it consistently for five years. It also explains why a newcomer’s rating can keep rising for a while even during a spell of ordinary scores.
Players who stop playing, through injury, retirement or simply not being picked, eventually drop off the published table, even though their last rating still exists in the background.
The highest ratings in history
Because the ICC applied its formulas retrospectively, every Test player since the 19th century has a historical rating. That lets us compare across eras in a way that raw averages can’t, with the caveat that it is still only a model.
| Player | Country | Discipline | Peak Test rating |
|---|---|---|---|
| Don Bradman | Australia | Batting | 961 |
| Steve Smith | Australia | Batting | 947 |
| Len Hutton | England | Batting | 945 |
| Jack Hobbs | England | Batting | 942 |
| Ricky Ponting | Australia | Batting | 942 |
| Sydney Barnes | England | Bowling | 932 |
| George Lohmann | England | Bowling | 931 |
| Imran Khan | Pakistan | Bowling | 922 |
| Muttiah Muralitharan | Sri Lanka | Bowling | 920 |
| Garry Sobers | West Indies | All-rounder | 669 |
Steve Smith’s 947 is the standout modern number. He reached it around the 2017-18 Ashes, a series in which England simply could not get him out, and it sits second only to Bradman. In the bowling list, Jasprit Bumrah’s peak of 907 in late 2024 made him the highest-rated Indian Test bowler in history, which tells you how rare a 900-plus rating is.
For a closer look at how two modern greats compare across formats, our Babar Azam vs Virat Kohli breakdown uses ratings alongside the raw numbers.
Why the ICC rankings actually matter
For a long time the rankings were mostly a talking point. That has changed. They now carry real consequences.
World Cup qualification
The clearest example is the 2027 Men’s Cricket World Cup in South Africa, Zimbabwe and Namibia. With the old ODI Super League scrapped, direct entry was decided by the ODI rankings: the top eight sides on the cut-off date of 30 September 2026, not counting co-hosts South Africa and Zimbabwe, went straight through. West Indies, champions in 1975 and 1979, missed out and have to go through the qualifier. It’s a stark illustration that a few lost bilateral series can cost a team a World Cup place. You can see the history of the tournament they are chasing on our Cricket World Cup winners list.
T20I rankings have played a similar role in filling the expanded T20 World Cup fields, where places beyond the hosts and the previous tournament’s best performers have been allocated on ranking.
Seedings, money and pride
Rankings are also used for seeding and for certain prize money at the cut-off dates the ICC sets. And for players, a number one ranking is a genuine career badge. Players talk about it, boards mention it in contract talks, and broadcasters put it on the screen every time a top-rated batter walks out.
Common myths and mistakes about the ICC rankings
“A win is a win, so it’s worth the same points”
Not at all. A win over the second-best team in the world can be worth several times more to your rating than a win over a low-ranked side. Who you play is as important as whether you win.
“Playing more matches pushes you up the table”
The rating is an average, not a total. Playing lots of matches only helps if those matches earn more points than your current rating. A strong team that piles up wins against weak opposition can actually see its rating barely move, or even dip slightly if it drops a game.
“The Test rankings and the World Test Championship are the same thing”
They aren’t. The WTC uses a percentage of points available across a fixed two-year cycle and finishes with a final at a neutral venue. The Test rankings use a rolling three-to-four-year window with opponent-strength weighting. A team can be top of one and second or third in the other.
“Ratings above 900 must mean the player is the best ever”
A 900-plus rating means a player has had an extraordinary peak relative to the cricket around them. It’s a measure of a high point, not a whole career. Plenty of all-time greats never crossed 900, while some brilliant players touched it for a few months.
“A team moved up, so they must have played”
See the section on the annual update. The May recalculation alone can change the order at the top.
How to read the rankings like an expert
When you look at the official table on the ICC rankings page, you’ll usually see three numbers next to each team: matches, points and rating. The rating is the only one that decides position. Points is the total pot, and matches is what it’s divided by.
A few habits help. Look at the gap between teams rather than the order: a two-point gap at the top is almost meaningless and can flip after one series. Check how many matches a team has in the window, because a side with few fixtures can swing wildly from a single result. And remember the annual update date. A team clinging to number one in April may be relying on results that are about to drop out.
For players, the most useful number is often the movement, not the position. A bowler who jumps 40 places after one match has usually done something special against a strong batting line-up, because that’s what the formula rewards most generously.
Frequently asked questions
How often are the ICC rankings updated?
Player rankings are updated after each round of international matches, usually weekly during busy periods. Team ratings change after each match or series, and there is a larger annual update every May when the oldest results drop out and others are reweighted.
What is the highest ICC rating ever?
Don Bradman’s retrospective Test batting rating of 961 is the highest. Among modern players, Steve Smith’s 947 is the best batting figure, and Sydney Barnes holds the top bowling rating with 932.
Do one-off matches count in the team rankings?
Every recognised international in the format counts in the white-ball rankings. In Tests, the ICC’s method is built around series, with a series bonus on top of individual results, so series of two or more matches carry the most weight.
Can a team lose a match and still go up the rankings?
Rarely, but yes, through the May update or because other teams’ results change the picture. Within a single match, a loss earns fewer points than your current rating in almost every case, so it pulls your average down.
Why does a player’s rating rise when he hasn’t played?
Usually it doesn’t. What changes is his position, because players above him have dropped points through poor form or fallen off the list through inactivity. His rating stays the same; the people around him move.
Are women’s ICC rankings calculated the same way?
The women’s team and player rankings follow the same principles, with ratings based on results and opposition strength. Women’s ODI and T20I tables are published separately from the men’s.
The ICC rankings are at their best as a guide to form over a few seasons rather than a verdict on any single series. If you want to see the players behind the numbers, head over to our cricket hub for the latest highlights, fixtures and fan ratings from around the world.
Comments