Skip to content
Cricket

Cricket Pitch Dimensions: Length, Width, Creases and Field Size

Cricket Pitch Dimensions: Length, Width, Creases and Field Size โ€“ Predict the Pitch

A cricket pitch is 22 yards (20.12 metres) long and 10 feet (3.05 metres) wide, measured between the two sets of stumps. It sits in the middle of a much larger oval field, whose boundary in international cricket must be no more than 90 yards (82.3 metres) and, under ICC playing conditions, no less than 65 yards (59.4 metres) from the centre of the pitch.

Those are the two numbers most people search for. Below you will find every key measurement in cricket, from the creases and stumps to the 30-yard circle, the ball and the bat, in both imperial and metric units.

Quick answers

  • How long is a cricket pitch? 22 yards (20.12 m) between the stumps.
  • How wide is a cricket pitch? 10 feet (3.05 m).
  • How tall are the stumps? 28 inches (71.12 cm).
  • How wide is the wicket? 9 inches (22.86 cm), across the three stumps.
  • How big is a cricket field? There is no single size. International boundaries must be between 65 and 90 yards from the centre of the pitch.
  • What is the 30-yard circle? An oval marked 30 yards (27.43 m) from the stumps at each end, used for fielding restrictions in limited-overs cricket.

Cricket pitch dimensions

The pitch is the rectangular strip in the centre of the field where the ball is bowled. Its size is fixed by Law 6 of the Laws of Cricket, maintained by the Marylebone Cricket Club (MCC).

MeasurementImperialMetric
Length between the stumps22 yards20.12 m
Width of the pitch10 feet3.05 m
Popping crease to the stumps4 feet1.22 m
Bowling crease length8 feet 8 inches2.64 m
Return creases (minimum length behind the popping crease)8 feet2.44 m

The 22-yard length goes back centuries. It equals one chain, an old surveyor’s measurement used in England, and it has stayed the same ever since. Find out how different surfaces behave in our guide to cricket pitch types.

The creases

White lines called creases are painted at each end of the pitch:

  • Bowling crease: the line the stumps stand on.
  • Popping crease: four feet in front of the bowling crease. It marks the batter’s safe ground. A batter with no part of their bat or body grounded behind it can be run out or stumped. For a fair delivery, part of the bowler’s front foot must land behind it.
  • Return creases: lines at right angles to the others, either side of the stumps. The bowler’s back foot must land inside them.

Overstepping the popping crease is the most common reason for a no-ball. See our guide to no-balls and free hits.

Stumps and bails

PartImperialMetric
Height of the stumps above the ground28 inches71.12 cm
Total width of the wicket9 inches22.86 cm
Number of stumps per wicket3, with 2 bails on top

The three stumps are placed close enough together that the ball cannot pass between them. At least one bail must be removed for a batter to be bowled, stumped or run out. Many international and franchise matches now use LED stumps and bails that light up when the bails are dislodged.

Cricket field size and boundaries

Unlike the pitch, the field itself has no fixed size or shape in the Laws. Grounds are usually oval, but every one is different, which is part of cricket’s charm. For international matches, the ICC sets limits:

  • Maximum boundary: 90 yards (82.3 m) from the centre of the pitch.
  • Minimum boundary: 65 yards (59.4 m) from the centre of the pitch.

The boundary is usually marked by a rope or cushioned barrier set slightly inside the fence. A ball that reaches the rope along the ground scores four; one that clears it without bouncing scores six. Short boundaries make big hitting easier, which is why some grounds and T20 leagues are known for high scores.

Some of the largest cricket grounds are also enormous stadiums. The Narendra Modi Stadium in Ahmedabad is the world’s largest cricket stadium by capacity, and the Melbourne Cricket Ground regularly hosts crowds of more than 90,000.

The 30-yard circle

In ODIs and T20s, an oval is marked on the field 30 yards (27.43 m) from the middle stump at each end. It is drawn as two semicircles joined by straight lines, so it forms a long oval around the pitch.

The circle exists for fielding restrictions. During the powerplay, only two fielders may stand outside it, and limits continue for the rest of the innings. Test cricket has no circle restrictions. See where each fielder stands in our fielding positions diagram.

Ball and bat sizes

ItemRule (men’s cricket)
Ball weight155.9 g to 163 g (5.5 to 5.75 oz)
Ball circumference22.4 cm to 22.9 cm
Bat lengthNo more than 38 inches (96.52 cm)
Bat widthNo more than 4.25 inches (10.8 cm)
Bat depthNo more than 2.64 inches (6.7 cm)
Bat edgesNo more than 1.56 inches (4.0 cm)

Women’s and junior balls are slightly lighter and smaller. The limits on bat depth and edges were added in 2017 to stop bats becoming ever thicker and more powerful. Read more in our guides to cricket balls and cricket equipment.

Junior pitch sizes

Young players often use shorter pitches so they can bowl and play shots properly. National boards set the exact distances by age group, and junior pitches are commonly between about 16 and 21 yards, moving up to the full 22 yards in the mid to late teens.

Frequently asked questions

Why is a cricket pitch 22 yards?

Twenty-two yards is one chain, a traditional English unit of length. It was written into the earliest known Laws of Cricket in the 18th century and has never changed.

What is the difference between the pitch and the field?

The pitch is the 22-yard strip in the middle where the ball is bowled. The field, or outfield, is the whole playing area out to the boundary.

Are all cricket grounds the same size?

No. Boundary sizes and shapes vary from ground to ground. International matches only require boundaries within the ICC’s minimum and maximum limits.

How far does a bowler run?

There is no rule on run-up length. Fast bowlers often run in from 20 to 30 metres away, while spinners may take only a few steps.

New to cricket? Start with our guide to formats, how many balls in an over and our A to Z of cricket terms.

Sources: MCC Laws of Cricket (Laws 4 to 8) and ICC playing conditions. Last checked November 2026.

Comments

Join the discussion

Your email is never shown. Comments are checked before they appear.